en 6x sin interés

Publicación pausada

Características principales



  • Puertos incluidos: 2 puertos SFP,4 puertos RJ-45

  • Tipo de telecomunicación: Store and forward

  • Capacidad de conmutación: 12 Gbps

  • Es gestionable: No

  • Ancho x Profundidad x Altura: 135 mm x 87 mm x 32 mm

  • Peso: 0.503 kg

  • Es montable en rack: No


Physical Port

4-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured
Fiber Port Redundancy

Link status auto-detect and redundant on Dual ports with the same connector type
Only Primary-Port is active at a time, the Backup-Port is blocked
When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically.
Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port.
Layer 2 Features

Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
9K Jumbo Frame Size support
Backplane (Switching Fabric): 12Gbps
Integrated address look-up engine, support 1K absolute MAC addresses
Automatic address learning and address aging
CSMA/CD Protocol
Industrial Case / Installation

Slim IP30 metal case protection
DIN Rail and Wall Mount Design
Redundant Power Design
- 12 to 48V DC, redundant power with polarity reverse protect function- AC 24V power adapter acceptable
Supports EFT protection 6000 VDC for power line
Supports 6000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature

Garantía del vendedor: 1 años